add share buttons

Rubber Stair Treads Installation Guide

Rubber stair treads are an effective means of improving the safety of staircases, stairwells, and other indoor stairways. Failure to properly cover staircases may lead to accidents and subsequent liability for the property owner. Moreover, uncovered staircases are susceptible to a greater degree of wear and tear over time. Follow these tips for expert tread installation, and protect guests, employees, and property owners from injury and harm.

1. Understand the limitations of rubber stair treads.

There are a few instances in which rubber treads should not be applied to steps. For example, treads should never be applied to oddly shaped or deteriorating steps. 

2. Use epoxy nose caulk as adhesive.

Epoxy nose caulk must be used in order to install stair treads that will remain sturdy, resilient, and trust over time. A water-based contact adhesive, epoxy nose caulk performs two very important functions. You can browse https://www.mauldinsteel.com/ to know more about Steel Stair Treads.

3. Be mindful of the temperature.

Temperature can have a significant impact on the installation of stair treads. For this reason, a minimum of 70 degrees Fahrenheit is recommended for both stair treads and adhesive. 

4. Fill-in cracks or chips in the step prior to installation.

To create the most flush application possible, epoxy nose caulk must be used to fill in any cracks or chips in the surface of the step prior to stair tread installation. 

5. Clean each stepping surface prior to installation.

Each stepping surface must be clean in preparation for stair tread installation. Specifically, all oils, grease, rust, paint, varnish, and previous adhesive residue must be removed.

6. Trim each stair tread for a custom fit.

Not all steps are constructed with the same dimensions. As a result, stair treads are made oversized and untrimmed to ensure they cover the entire surface of the most common steps. 

7. Apply each stair tread nose-first.

When it comes to safety, installing stair treads so there is no space between the tread and the surface of the step is a top priority. Most important is the way in which the tread bonds to the step at the nose-end, as the portion of the tread is most prone to pressure-induced slippage.

8. Use a hand roller to finalize the application.

To reinforce the bond between the stair tread and the step, use a hand roller to firmly press down on the tread from front-to-back. The goal is to push the tread closer to the surface of the step, eliminating any spaces that may still exist.